OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007 deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Celeron(R) CPU 1.70GHz ("GenuineIntel" 686-class) 1.70 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM real mem = 534605824 (509MB) avail mem = 509296640 (485MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 06/27/03, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.3 @ 0xfc940 (62 entries) bios0: vendor Intel Corp. version "LY84510A.86A.0043.P17.0306270645" date 06/27/2003 bios0: Intel Corporation D845GLAD pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf48c0/176 (9 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #1 is the last bus WARNING: can't reserve area for BIOS PROM. bios0: ROM list: 0xc0000/0x8000 acpi at mainbus0 not configured cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82845G/GL" rev 0x01 "Intel 82845G/GL Video" rev 0x01 at pci0 dev 2 function 0 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 3 uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 5 uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 9 ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 10 ehci0: timed out waiting for BIOS usb0 at ehci0: USB revision 2.0 uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1 ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x81 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "3DFX Interactive Voodoo3" rev 0x01 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) malo0 at pci1 dev 3 function 0 "Marvell Libertas 88W8335" rev 0x03: irq 5, address 00:18:e7:0a:c7:26 fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x81, i82562: irq 11, address 00:07:e9:f5:0f:21 inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: wd0: 16-sector PIO, LBA, 38204MB, 78242976 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: SCSI0 5/cdrom removable atapiscsi1 at pciide0 channel 1 drive 1 scsibus1 at atapiscsi1: 2 targets cd1 at scsibus1 targ 0 lun 0: SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4 ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 7 iic0 at ichiic0 auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 7, ICH4 AC97 ac97: codec id 0x83847650 (SigmaTel STAC9750/51) ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D audio0 at auich0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask e7ed netmask efed ttymask ffef pctr: user-level cycle counter enabled mtrr: Pentium Pro MTRR support uhub4 at uhub2 port 1: Lexmark USB Hub, rev 1.10/1.00, addr 2 ugen0 at uhub4 port 1 ugen0: Lexmark X1100 Series, rev 1.10/1.00, addr 3 ulpt0 at uhub4 port 2 configuration 1 interface 0 ulpt0: Lexmark Lexmark X1100 Series, rev 1.10/1.00, addr 4, iclass 7/1 ulpt0: using bi-directional mode dkcsum: wd0 matches BIOS drive 0x80 root on wd0a swap on wd0b dump on wd0b malo0: setting long slot failed